How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

Need to know how to remove front panel on dryer to install

This answer was rated:

Need to know how to remove front panel on dryer to install conversion kit.
Model # XXXXX
you will need to remove the screws from the back of the top panel, pull back and slide off, remove the screws holding the control panel and set aside, remove the two screws at the top of the front panel, tilt out and lift off and you can access the burner assy / thanks
graphic
Appliance Tech Larry and 2 other Appliance Specialists are ready to help you

Related Appliance Questions