How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

I have a Whirlpool duet ht washer. It is stopping just before

Resolved Question:

I have a Whirlpool duet ht washer. It is stopping just before the final rinse/spin cycle, making a buzzing noise, then the screen begins to flash "F21". What do i do?
Submitted: 7 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 7 years ago.
the F21 error is showing it isn't drain all the water out ,, remove the three screws from the bottom of the lower front panel, push down and remove, remove the filter from the pump by turning and clear the filter and put back together ,,, have towls handy because you will loose water / thanks Larry
Appliance Tech Larry and 4 other Appliance Specialists are ready to help you