How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

I need to know how to install the spring return, part number

Resolved Question:

I need to know how to install the spring return, part number(NNN) NNN-NNNN on my ice maker. I have the part and have seen the diagrams with it all apart, but I can't seem to figure out how to install it.
Submitted: 7 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 7 years ago.
the spring slides down on the metal rod with the loop part first and hooks around the rod at cruve and then the long parts twist one time and lays againg the housing and the front cover goes on and the end of the rod fits into the small hole on the front cover and the three screws goes in to hold it all together / thanks
Appliance Tech Larry and other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
So the spring slides all the way down the metal rod? And hooks in under the cover?
Expert:  Appliance Tech Larry replied 7 years ago.
yes it does / thanks

Related Appliance Questions