How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73376
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

We have a Maytag Model MAH5500BWW Serial A2955546CC clothswasher.

Resolved Question:

We have a Maytag Model MAH5500BWW Serial A2955546CC clothswasher. It stopped mid-cycle and the door opened before the spin cycle. When we restart it the door lock comes on and then unlocks after two seconds and nothing happens. Any thoughts?
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
is there any error codes that pop up on the screen?
Customer: replied 7 years ago.
Only PF when we unplug it and plug it back in, but when we hit the start button that goes away.
Expert:  Tyler Z. replied 7 years ago.
how long have you waited after you press start for it to do something?
Customer: replied 7 years ago.
Not long enough apparently. Because I just walked back in the room and it took off. Why do you suppose it failed the first time.
Expert:  Tyler Z. replied 7 years ago.
possibly. But often if the door get pushed open the computer just needs time to try and figure out what's going on and it will go through a few extra sequences. If the latch had failed it would have actually given you an error code on the display so I don't think that was probably your issue.
Tyler Z. and 2 other Appliance Specialists are ready to help you

Related Appliance Questions