How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask built1950 Your Own Question
built1950
built1950, Handyman
Category: Appliance
Satisfied Customers: 210
Experience:  Appliance Installer
19717507
Type Your Appliance Question Here...
built1950 is online now
A new question is answered every 9 seconds

whirlpool super capacity plus washing machine middle column

Resolved Question:

whirlpool super capacity plus washing machine middle column will not turn back and forth and during rinsing cycle the tub will not spin? it just makes a humming noise. Any Suggestions are appreciated. Thank you
Submitted: 7 years ago.
Category: Appliance
Expert:  built1950 replied 7 years ago.
Thank you for asking your question on JustAnswer.
FILL, NO AGITATE, DRAIN, AND NO SPIN. YOU HAVE A STRIPPED DRY COUPLING, WHICH IS A PLASTIC RUBBER COMBINATION THAT CONNECTS THE MOTOR TO THE TRANSMISSION. REMOVE SCREWS AND FLIP TOP CONSOLE UP. FLAT HEAD SCREW DRIVER REMOVE CLIPS AT CORNERS, DISCONNECT 2 WIRE PLUG. PULL WHOLE OUTER CABINET TOWARDS YOU AND PULL AWAY FROM MACHINE. LOOKING AT THE BOTTOM CENTER, REMOVE SCREWS HOLDING MOTOR CLIPS, DISCONNECT ALL PLUGS (HARNESSES) AND REMOVE MOTOR. COUPLING WILL BE VISIBLE AND PEGS/RUBBER WILL BE WORN, REPLACE AND REASSEMBLE
built1950 and 2 other Appliance Specialists are ready to help you

Related Appliance Questions