How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask built1950 Your Own Question
built1950, Handyman
Category: Appliance
Satisfied Customers: 210
Experience:  Appliance Installer
Type Your Appliance Question Here...
built1950 is online now
A new question is answered every 9 seconds

Can you tell me what the specs are on my GE model JVM61001

Resolved Question:

Can you tell me what the specs are on my GE model JVM61001 1985 microwave? I bought a replacement one which I thought was the correct size, but it wasn't, so I'm trying to find one the same size as this one.
Submitted: 7 years ago.
Category: Appliance
Expert:  built1950 replied 7 years ago.
Thank you for asking your question on JustAnswer.
Your microhood was designed to fit in the standard 30" opening above a 30" range. Most any 30" hood should replace it. On the other hand if you need parts for repair they are available here:

Hope this is helpfull.
Customer: replied 7 years ago.
Okay, that is width, but they were saying it was too deep. Do you have the height and depth measurements as well?
Expert:  built1950 replied 7 years ago.
I've been at this for thirty years and there are only two critical measurements to install a microhood. Both are cabinet measurements. 30" width between cabinets and 30" height from range surface to bottom of cabinet above microhood. If these two facts are evident then the height and depth of the hood don't matter and you can install any microhood.
built1950 and 2 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
Thats what I told them!! They are coming back for free now, thank you so much!

Related Appliance Questions