How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9060
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

Hi! We have a Maytag range Model # XXXXX it is showing

This answer was rated:

We have a Maytag range Model # XXXXX
it is showing a fault code F9-5, and when I pulled the stove away from the wall, unplugged it, and plugged it back in it showed F9-6. I looked up a list of fault codes, and note that both of these codes are in reference to the lower door latch. We need to use the range top tonight, (and intend to get the door fixed, if that is the problem), but would like to know if there is a way to reset or turn off the fault code so that we don't have to listen to the beeping while we use the range.

the failt code you have , shows .

F9-5 Unlock switch, lower oven .................. Every 60 seconds when latch

locked ........................................

Check switches latch assembly wiring.

so you need to look at your latch assy ,per tech sheet on page 5 no way to reset other then turn power off or replace latch assy.

Whrlp Master Tech and other Appliance Specialists are ready to help you

Related Appliance Questions