How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

hi, have an error code E6 on my kenwood kdw12st3a dishwasher

Customer Question

hi, have an error code E6 on my kenwood kdw12st3a dishwasher and have seen reviews of this meaning abnormal temerature/temp sensor burned out? but not for this specific model, am persuming they are the same? also, is this a simple job to change/reset?
thanks.
Submitted: 7 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 7 years ago.
The reset sequence used is:
1) Crack the door open.
2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry
3) Close and latch the door
4) Press the cancel button (the circle with the triangle in it)

if this fails you will need to replace the control board / thanks
Customer: replied 7 years ago.
hi, this is the information i had already found online, and is for another model, my model has buttons that are un accessable when the door is closed, and has not got a cancel button.model is a KDW12ST3A, it has 3 buttons and a power button.
thanks
Expert:  Appliance Tech Larry replied 7 years ago.
sorry but there isn't a E6 error in my manuals ,,, and only thing i find on this model with E6 says to replace the control ,, cant find a reset for this model ,, you might ry contacting kenwood and see if they have anything on E6
Customer: replied 7 years ago.
O.K.
thanks anyway.
Expert:  Appliance Tech Larry replied 7 years ago.
you are most welcome ,, i dug though everything i have in my files and on the web / thanks again / larry
Customer: replied 7 years ago.
hi, has been 7 days now and have not had my deposit refunded?
sorry, but the answers given did not satisfy my question and i thought i would be refunded by now.
thanks

Expert:  Appliance Tech Larry replied 7 years ago.
have you replace the control board as i said?