Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
do you know where I can get instructions to change out a whirlpool icemaker Assy#4317943
may i have your model number and i can tell you how to swap it out / thanks
it is a Kenmore Side by Side Refrigerator Model#106.52282201 purchased 7/02.
ok thanks ,, i just looked and this is one of the easy ones ,, look at the icemaker and remove the screw at the bottom of the icemaker and loosen the two at the top ,, lift the icemaker up off the two top screws and unplug the icemaker ,, cut the cut on the new icemaker to match the cup on the old one and plug in and hang on the screws and tighten and install the bottom screw and allow 24 hours for the icemaker to fill, freeze and dump / thanks Larry
before i leave today if you still have any futher questions feel free to ask / thanks
thats all there is to it, no water lines or anything else ?
no ,, thats it ,, when you unplug the icemaker it cuts off the water valve to it but the water in door will still work ,, as i said this is one of the easy ones haha
Home Appliance tech
Over 35 years of in home appliance repair and service