Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
Hello, I have a Kenmore stove model XXXXXXXXXXX The ignitor for my right front burner (power burner, marked as burner "E") is not clicking. The gas is coming through (I smell it), and all the other burners are working. This burner happens to be the one we use most often. At first it was working sporadically, and now is not working at all. Ideas? Thanks a bunch! - Carmen from California
Already Tried: Cleaning the area around the ignitor.
Hi Carmen...Try typing the model number with spaces in it...The system did not accept it the way it was typed...Thanks Bob Who used to live in Ca
Thanks Bob-the-former-Californian. 790 758 623 01
Either your igniter on the front right burner..#11a is bad our the spark module #8 is bad ....What i would do is ..Cut power to unit...then you are going to have to access the burners by removing the top of stove...You will see a wire leading to each igniter ...Take the wire from the back right burner ...Switch it with the front burner wire...(make sure all wires are connected no laying in stove)...Then if you start the right rear the front right should fire up...if so then your spark mudule is bad...If not then the igniter is bad...
Home Appliance Tech
23 Years Major Appliance Repair