Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
I have a 3 year old Haier brewmaster, and it currently stopped cooling. You can unplug it and after the compressor cools it cools again but the compressor wont cycle again until it is unplugged and it sits for awhile. What is wrong?
<u><em><strong>WOW that just is not fair!</strong></em></u> Look for a fan motor not working or running very slowly/ The coils need air flow.
RETIRED FIELD SERVICE TECHNICIAN
28 YEARS IN THE FIELD WITH SEARS SERVICE GRADUATE SEARS TECH CENTER, TAUGHT ADULT VOCATIONAL ED.
The Haier has no fan it is a cold plate in the back off the unit. There is an overload circuit on the back that I took off and clean and that seems to be helping. I am going to pull part numbers off the thermostat and the overload switch that sits on the compressor and replace them to see if that keeps it running. Like I said I cleaned the overload switch and it seems to be cycling ok for the last 4 hours.