Recent Feedback
Hi Can you please tell me how to replace the belt on my GE washer. I have a new belt in hand and the front of the waster off. The mod is WWSE5240G2WW. I need to know where to put the belt around. Thank-You Charles
put the belt around the motor pully and start it onto the transmittion pully and turn the pully to pull it on / thanks
Experience: Over 35 years of in home appliance repair and service
The belt is not long enough to go onto the main pully, this is the correct belt as I ordered from the store I got the machice at. I measured the old belt to the new belt they are the same length. I'm working from the bottom of the machine looking in the main pully is in the back
it will be really tight ,,, once you have it on the motor and started on the main pully you will turn the pull ans stright it on ,, it will go but as i said it will be tight
the belt is now long enough to go over the main pully... it looks like there is a 2 in gap... do you have a picture of or know where I can get a picture of how this belt look once it is in place... when I took the fornt off the machine the belt was broken and on the bottom... this machine is less than 1 year old...
i do not have a picture but if the belt doesn't work out i would call and get a servicer out to put one on ,,, the belt and labor is covered under your one full year manufactors warranty and all parts and labor will be covered at no charge ,, i believe i would call them anyhow since this belt should not have broken and you may have a problem to cause it to break