How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 78804
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

My electrolux dishwasher has all the lights flashing and wont

Resolved Question:

My electrolux dishwasher has all the lights flashing and won't run through the cycly. I removed the bottom panel and the leak detect error light is on, but i cant find any leak. Can i reset it and see if the leak detect trips again?
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
The only way to reset the error is to pull your entire dishwasher out and tip the machine backwards. There is an access panel on the bottom that you need to take off. One you takes this off you can soak up the water in the basepan and the error will go away when it no lo ger detects water.
Tyler Z. and 2 other Appliance Specialists are ready to help you