How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have a Kenmore 90 series gas dryer. the unit is plugged in

This answer was rated:

I have a Kenmore 90 series gas dryer. the unit is plugged in and the gas is on however the unit will not fire up.

Hi thanks for the question.

Can you hear a click when you first start the dryer ?

And where is the lint filter located .

Customer: replied 7 years ago.
The lint filter is in the front under the door and it is clean. I do not hear a click when it first turns on it just starts spinning.
Ok take the bottom front panel off you will see a thermal fuse on the blower housing.Send me the model # XXXXX will send you the breakdown of the dryer and show you the thermal fuse.
John and other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
model # XXXXX


This is the thermal fuse , its located on the blower housing.

Follow the do it yourself section.

If you need more help get back to me
Did you find the problem get back to me.

Related Appliance Questions