How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73415
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

My Whirlpool Gold Dishwasher Model No. GU1500XTLS1 will not

This answer was rated:

My Whirlpool Gold Dishwasher Model No. GU1500XTLS1 will not work. The rinse only light continually blinks on and off. I tried resetting the electrical circuit hoping it would get out of this mode but it didn't work.

Any ideas?
Try holding the rinse only button for 5 seconds to reset. If that doesn't work then press

heated dry ,   High temp wash,   Heated dry,   High temp wash,   Heated dry

If you don't have heated dry then use "air dry".

If that doesn't reset your control board then unfortunately you will need a new touchpad because the error your getting is saying that a touchpad button is stuck.
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions