How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask applianceguy Your Own Question
applianceguy
applianceguy, Customer Service
Category: Appliance
Satisfied Customers: 1902
Experience:  Ten Years experience. Certified in most major brands Including Whirlpool Frigidaire maytag Amana.
9557001
Type Your Appliance Question Here...
applianceguy is online now
A new question is answered every 9 seconds

0ur Whirlpool Quiet Partner III dishwasher stopped fairly close

Resolved Question:

0ur Whirlpool Quiet Partner III dishwasher stopped fairly close to the beginning of the wash cycle last night and the "clean" light began flashing and does not stop even with the door closed. I suspect some sort of error code. Can you tell what's wrong? Is it something I can fix myself? Or, do I need to call a repairman for a house call?

Thanks
Dennis
Arlington, WA
Submitted: 7 years ago.
Category: Appliance
Expert:  applianceguy replied 7 years ago.

Hi,does it flash seven times then pause and so on?

Customer: replied 7 years ago.
Yes, I does!
Expert:  applianceguy replied 7 years ago.
The dishwasher is not reading the water temp getting hotter. You can have a bad heating element, thermostat, control board or door switch. It can be tricky to figure out, even for a tech. I would recommend calling for service.
applianceguy and other Appliance Specialists are ready to help you

Related Appliance Questions