How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Gas stacked neptune dryer wont heat, ignitor glows no gas,

Resolved Question:

Gas stacked neptune dryer won't heat, ignitor glows no gas, drum rolls
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get me model #? thanks Bryan
Customer: replied 7 years ago.
MLG2000AWW
Expert:  Bryan replied 7 years ago.
do you hear the gas coils clicking when you first start this? Part 3479most likely its the cause for it not lighting. let me know if you hear a click when you push start and the dryer starts turning. thank,Bryan
Customer: replied 7 years ago.
I hear a click when I push the start button. Only one click.
Expert:  Bryan replied 7 years ago.
ok you need to replace the gas coils, these should click again when it opens the valve, these are not to expensive, only around $20.00, let me get you a site link. I'll be right back. thanks, Bryan
Expert:  Bryan replied 7 years ago.
you can get these for $19.50 @ http://midwayparts.net/midwayparts/zen-cart-v1.3.8a-full-fileset-12112007/index.php?main_page=product_info&cPath=7&products_id=104 this will take care of your problem, they are located on the gas valve right where the burner assembly is, thanks Bryan
Bryan and other Appliance Specialists are ready to help you