How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73359
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I followed the instructions that the gentlman gave me to fix

Customer Question

I followed the instructions that the gentlman gave me to fix the Bosch Dishwasher. I purchased the part, intstalled as instructed and the drain pump will still not turn off nor am I able to get the unit to run a cycle.

I do not remember the mans name but it was Sunday afternoon when we were emailing.

[email protected]
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
What part did you replace?
Customer: replied 7 years ago.
I was told to replace the INLET water valve.
Expert:  Tyler Z. replied 7 years ago.
Alright I'm not sure who gave you that advice but you unit is stuck in flood mode. You will have to uninstall the unit and remove the left side panel. There is a round styrofoam float in the base that if stuck up will cause the unit to think there is water in the base pan. If there is then drain it out. If not then make sure the float is pushed all the way down.