How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9594
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

i have an Asko D3100 dishwasher that is playing up. The cycle

Customer Question

i have an Asko D3100 dishwasher that is playing up. The cycle selection light is blinking and it continually tries to drain the machine out (even tho' it is empty). This continues even when the on / off button is turned off, i have to turn it off at the power point. i Have pressed the start button for over 5 seconds to reset the programme to no avail
Submitted: 7 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 7 years ago.
Customer/p>

this is a fault code for a overfill or leak in d/w turning unit off and back on WILL NOT reset this fault.manufacture recommends calling for service.

Customer: replied 7 years ago.
sorry but i already know the flashing light is for an overfill fault. i was hoping for a fix.
Expert:  Whrlp Master Tech replied 7 years ago.
ok are you able to take bottom panel OFF?
Customer: replied 7 years ago.
i can but are in the middle of about 5 jobs right now.can we resume this in the morning?
Expert:  Whrlp Master Tech replied 7 years ago.

I will not be back on till at least 9pm EST tommorrow.

if you wish I can OPT out and any one of can assist you to get underneith unit.

Customer: replied 7 years ago.
i will come back on line tomorrow and we'll take it from there
Expert:  Whrlp Master Tech replied 7 years ago.
Customer/p>

I OPTED out due to , I was not able to find a parts break down on your model ,

Hopefully another Expert is will be better able to assist you.

 

I just don`t want to lead you the wrong way,, hope you understand.

Customer: replied 7 years ago.
sorry but i ended fixing it up myself as you opted out