How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

How may I change a broken dryer belt on my Maytag Performa

This answer was rated:

How may I change a broken dryer belt on my Maytag Performa?
can you get me the model #? I can help. thanks Bryan
Customer: replied 7 years ago.
PYET444AYW i found this on the inside of the dryer door. Hope it helps!
ok thats it, first off here is a link for all the diagrams for your machine. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5172067 now about 3 " in from each side between the top and the front panel there are two clips , push these in and lift the top up and let it lean back against the wall. then look down the inside along the side and you will see two 5/16 I think screws that hold the front panel on remove these and tip front forward at the top and remove the door switch wires then lift the front panel off the botton clips and put it aside , pull the drum out and you will see the pulley and motor, put the belt around the drum place drum back in and put the belt back around the pulley and motor, as shown, I will send diagram
Bryan and other Appliance Specialists are ready to help you