How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

KitchenAid dishwasher KUDK03IT purchased 5/2008 The dishwasher

Resolved Question:

KitchenAid dishwasher KUDK03IT purchased 5/2008

The dishwasher cycles OK and the load comes out clean. The keypad works
corectly and indicates the cycles as the wash proceeds.
Four of the 14 indicator LEDs exibit a faint glow. Rinse only, Start, Cancle and Wash.
This occurs all the time, even when the unit is running a wash cycle.
I looked at the control console, nothing obvious.


Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
its sounds like there is one of your led lights that has come loose and is shining through the other lights. its possible one of the bulbs has come out of its holder and is elumitating the others. if its running correctly I wouldnt worry about it to much but if you start having problems it may be the led display thats causing it, is the your control panel? Part(NNN) NNN-NNNN width=let me know thanks, Bryan
Customer: replied 7 years ago.

Brian -

That is the control panel.

The four LEDs have a faint glow when the unit is powered off. I open the door,

and shut it, no difference. The washer never did this.


Something in the dispaly unit is not right.

Expert:  Bryan replied 7 years ago.
it sounds like they may be getting small amount of power to them from the control board then, let me do some more checking on this, thanks, Bryan
Customer: replied 7 years ago.

Ok Brian


I will leave the computer on the website for a while.

Expert:  Bryan replied 7 years ago.
checking now.
Expert:  Bryan replied 7 years ago.
ok this the control borad, they have allot off problems with these, there is no picture but this is most likely your problem, its around $83.00 @ the site above, about the cheapest around as far as I can see, this should take care of your problem, hope this helps, thanks Bryan
Bryan and 3 other Appliance Specialists are ready to help you

Related Appliance Questions