How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74438
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

space saver micro wave led displays 7777,replaced led process

Resolved Question:

space saver micro wave led displays 7777,replaced led process curcuit board tested several times AOK and after several days customer calls that same problem exists still 7777 will display
Submitted: 7 years ago.
Category: Appliance
Expert:  Tyler Z. replied 7 years ago.
7777 is not an error code. It means that either your control board is bad or your touchpad is shorted. Disconnect the ribbon cable from the touchpad to the control board. Then plug the unit in and see if the 7777 is gone. If not then your circuit board is shorting out somehow. If it does get rid of the error then you need to replace the touchpad.
Tyler Z. and other Appliance Specialists are ready to help you