how do you remove the front panel on the 90 series kenmore dryer?Im trying to get at the heating element.
can you open the door and get me the model# XXXXX the tag . ? thanks Bryan
you need to take the top off of this first, pop the end caps # XXXXX and then remove the screws holding the control panel down # XXXXX and then pull the control forward and tip it back the remove the 3 1/4 inch screws out # XXXXX I think , then pull the top forward and off. then there will be screws on top take them out and the ones on the bottom of the front panel behind the bottom panel under the door, this has clips holding it on, use a screw driver and release these clips and the panel will pull out at the top and off the bottom clips. then you will see the screws. remove the wires and the front will come off, hope this is what you needed. thanks Bryan
heres the other diagram you may need, thanks Bryan