How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a large capacity GE dryer that is about 3 years old.

This answer was rated:

I have a large capacity GE dryer that is about 3 years old. It worked fine until the other day when the drum would not spin unless the button was held in. Would stop when the button was released. My wife said it would heat up while she held the button in but I have not confirmed this part.
can you get me the model #? thanks Bryan
Customer: replied 7 years ago.
let me look this up , thanks Bryan
Customer: replied 7 years ago.


I will look forward to your answer and will gladly pay for your expertise.



well the most likely cause for this is the motor, Part 275427these have a centrifical switch in them that keep the motor running on the run windings once the dryer starts spinning. this switch is probably bad. unfortunatley you cant buy the switch you have to replace the whole motor, hope this helps, thanks Bryan, heres a link to the motor,
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions