How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

kenmore ultrawash model#66515835791 half way through pot/pan

Customer Question

kenmore ultrawash model#66515835791    half way through pot/pan cycle unit lost power . have power to unit. any ideas?
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
you may have a bad thermal fuse in this, let me look it up , thanks Bryan
Customer: replied 7 years ago.
i've replaced the thermal fuse at the motor, but thats as far as I can figure on this one. I appreciate any other suggestions?
Expert:  Bryan replied 7 years ago.
check the wirenuts at the junction box in the bottom of the dish washer behind the bttom panel. sometimes the connections come loose, the thermal fuse i'm tlking about is on the control board in the top behind the inner door panel it looks like this, Thermal Fuse kit - Click Image to Closethese go allot, also check your door switches but I'll bet the thermal fuse is bad. you can order this here for under $14.00. hope this helps, thanks Bryan, link
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.

Bingo! Thank-you .

Expert:  Bryan replied 7 years ago.
your welcome, thanks Bryan

Related Appliance Questions