How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kenmore Gas dryer an HE3 , the dryer works to good

Resolved Question:

I have a Kenmore Gas dryer an HE3 , the dryer works to good I can't control the temperture , the clothes gets to hot to the touch , I have change settings but no change on the temperture, can you help
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
can you get me the model #? thanks Bryan
Customer: replied 8 years ago.

Bryan

Here is the information

 

Model - XXXXXXXXXXX /p>

Serial - MR2009648

Type - DADT - NAT -(NNN) NNN-NNNN- EL 22

Expert:  Bryan replied 8 years ago.
ok the model # XXXXX through all xxxxx please put a space between each # XXXXX letter. thanks Bryan
Customer: replied 8 years ago.

ok

 

Model - 1 - 1 - 0 - 9 - 2 - 8 - 2 - 2- 1 - 0 - 2

Expert:  Bryan replied 8 years ago.
got it let me look this up. thanks Bryan
Expert:  Bryan replied 8 years ago.
this is probably your problem. its the thermistor, it a thermosat, Part(NNN) NNN-NNNN width=its # XXXXX on this diagram, if this doesnt take care of the problem its the control board, this senses the temp. its around $30.00 at this site. http://www.repairclinic.com/Appliance-Parts?s=t-110.92822102-%3d%3d I would replace this, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you