How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

After a power surge I had to replace the control board on my

Resolved Question:

After a power surge I had to replace the control board on my GE oven wall mount model no JRP20911444 now everything works except the cooling fan
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
let me check that for you I'll be back soon. thanks Bryan
Expert:  Bryan replied 7 years ago.
this model # XXXXX comming up, can you get me the part # XXXXX replaced and maybe where you got it. ? thanks Bryan
Customer: replied 7 years ago.
sorry the model # XXXXX the fan will work in the self clean mode so Im thinking another part got fried
Expert:  Bryan replied 7 years ago.
this may be bad its the thermostat that runs the fan i believe,
Expert:  Bryan replied 7 years ago.
this machine is very hard to find which thermostat runs the fan and which is the thermal overload. the diagrams are not clear.I beleive though thsi could be your problem this turns the fan on when the oven wall reaches over 330 degrees. thanks Bryan, link , http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5220700
Bryan and 2 other Appliance Specialists are ready to help you