Its easier if you can take the dryer down
Can you do that And I will show you.
I need the model #
It is model FLSE60RGS1 Frigidaire and I found the parts list
I think i will need the reading housing assembly and the bearing drum support and the ball right?
Heres the kit you should get .It replaces all the parts that are worn.
Its cheaper to buy it this way
The parts listed that I sent you are from your model #
The are the parts you will need to replace the drum bearings
Here is the breakdown of your washer.
First take the top off the dryer .Then the front panel comes off
Two screws on each side of the front panel
Remove the front panel and remove the drum