How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a whirlpool washer MOO LSP7333PQQ it will not get all

This answer was rated:

I have a whirlpool washer MOO LSP7333PQQ it will not get all the water out of the clothes on high spin. The clothes are still very wet even if i run it on high spin a 2nd time they are still very wet?     Does it pay to fix this or just buy a new [email protected]            marcie
let me check your model # XXXXX Bryan
can you check your model # XXXXX not comming up. thanks Bryan
Customer: replied 7 years ago.

Here are all the # XXXXX found on the washer machine CR4037035 TYP 111

sm8 525146-A I have o whirlpool washer that will not get all the water out of the cothes on high soin, The close are still very wet even if I run it on high spin a 2nd time they are still very wet. What is wrong with it and ant Idea how much it would cost to fix it.

 

the # XXXXX think is

LSP733PQO

 

OR

LSP7333PQQ

 

OR

LSP7333POO

[email protected]

still cant bring model up. is this a duet front load washer.?
Customer: replied 7 years ago.

It is a on top loader Here are all the # XXXXX could find on it.

Whirlpool

SM8525146-A

MOD LSR7333PQO

 

TYP lll CR4037035

 

ON THE BACK OF IT

PART NO 395655 1

ok that did it thats a good model #, first off is this spinning at all? open the lid and see as its spinning let me know.
Customer: replied 7 years ago.
Yes But not as fast as it use to at the end of the spin
you need to replace the clutch assembly in this. the best price I've found on this is at this site. http://midwayparts.net/zen-cart-v1.3.8a-full-fileset-12112007/index.php?main_page=product_info&cPath=1&products_id=17 take a look at it and if you order it when you get it come back and tell you how to install it, thanks Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 7 years ago.

Thank you so----------- much for your help! I'm getting the part.

 

Marcie and Nathan Beyer wis.

your very welcome , thanks Bryan