How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

After about 30 minutes into the self-cleaning cycle, Code F3

Resolved Question:

After about 30 minutes into the self-cleaning cycle, Code F3? and non-stop beeping. Canceled the clean cycle, but not the fan keep going (over two hours) and the door will not unlock. Please help.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get me make and model #? thanks Bryan
Customer: replied 7 years ago.
Model SVE47600; we just need to use the oven--even if the self-clean does not work Bryan, thank you!
Expert:  Bryan replied 7 years ago.
if this is a Jenn air which is what I'm comming up with from the model # XXXXX is the error code.
F3 or F4 Open or shorted oven temperature sensorReplace oven temperature sensor
the sensor is the probe type piece sticking through the back of the oven. this is what it looks like. Part 1364 according to Jenn air this is bad. you can get this here, its lists for around $34.00. hope this helps thanks Bryan
Customer: replied 7 years ago.



Now the oven code is F2 and the beeping will not stop with cancel.

Expert:  Bryan replied 7 years ago.
ok well thst a different code. that means the oven overheated and this is caused by the control board relay sticking usually. heres that code , I believe though this still may be the sensor. try shutting the power off for about an hour and turn it back on, see if the oven works then. thanks Bryan
F2Oven too hotReplace relay board (if present) or oven temperature sensor
Bryan and 4 other Appliance Specialists are ready to help you

Related Appliance Questions