How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

my ge washer seems to have shook loose a spring on the tub.

Resolved Question:

my ge washer seems to have shook loose a spring on the tub. How do I find out
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get me the model #/? thanks Bryan
Customer: replied 7 years ago.
WESR3140GOWW
Expert:  Bryan replied 7 years ago.
this model # XXXXX come up can you check it again? also is this a top load or front load? thanks Bryan
Customer: replied 7 years ago.
The model number of the washer is WBSR3140GOWW
Expert:  Bryan replied 7 years ago.
ok the front panel comes off this machine. you need to take a flashlight and look along the top front between the top and the front panel ,there will be a clip on each side you need to slip a screw driver in and release these clipd. they are about three inches in from sides. then pull the panel out at the top and then lift it off the bottom clips. you will be able to check the piston rods then ,see if one has come off. let me know thanks Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions