How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

My front loading whirlpool washing machine does not spin. The

Customer Question

My front loading whirlpool washing machine does not spin. The model number is XXXXX I had a technician tell me it is the control board. He said there are two and they both need to be replaced. It seems unlikely both would go out at the same time, is there a way to tell which one is bad?
Submitted: 7 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 7 years ago.
the only board you need to replace is the motor control ,,, (inverter control) ,,, part number is(NNN) NNN-NNNNand its inside on the floor panel close to the pump ,,, online at it list for $121.70 ,,,, i hope this helps / larry

Related Appliance Questions