How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chas Your Own Question
Chas, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16413
Experience:  Maytag, Whirlpool, GE & Kenmore Factory Trained Service Tech
Type Your Appliance Question Here...
Chas is online now
A new question is answered every 9 seconds

My Maytag oven will not heat over 210 degrees

Resolved Question:

My Maytag oven will not heat over 210 degrees??
Submitted: 7 years ago.
Category: Appliance
Expert:  Chas replied 7 years ago.
Can I get the complete model number please of the unit, you can find this number where you pull the drawer out in the bottom.. Thank You
Customer: replied 7 years ago.

I don't see any numbers when I pull the drawer out however on the installation manual bottom right corner it reads 8101P506-60 on the electrical paper attached to the rear of the oven it say part number 8119P055-60?




Expert:  Chas replied 7 years ago.
How old is the oven? Is it a Gemini Range?
Customer: replied 7 years ago.
Oven is roughly 3 years old, it is a electric free standing range I see nothing that tells me Gemini
Expert:  Chas replied 7 years ago.
Does the display go higher than 210 degrees? and does the broil work okay in the unit?
Customer: replied 7 years ago.

when you select bake it will show 350 on the display pad, then start a 100 until it reaches 210, I've never used the broil?

Expert:  Chas replied 7 years ago.
And does the cooktop work okay? they glow red?
Customer: replied 7 years ago.
yes all 4 burners work fine, the broil seems to work, I selected broil high and the element inside is turning a bright red?
Expert:  Chas replied 7 years ago.
From everything I had you check and what you have told me, the problem is going to be your bake element going bad, it is not getting hot eneough to get the oven up to temperature, I would be replacing this part to repair it ...
Customer: replied 7 years ago.
thanks is that a difficult replacement something I can do?
Expert:  Chas replied 7 years ago.
This is a 2 screw repair, just make sure that you remove the power to the unit before you replace it..
Chas and other Appliance Specialists are ready to help you

Related Appliance Questions