How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have a maytag sdg305daww gas dryer that seems to be operating

Customer Question

I have a maytag sdg305daww gas dryer that seems to be operating correctly ( barrel turns & etc) but does not get hot anymore so clothes do not dry. Not knowing how these work, I assume the ignitor is not lighting. Any assistance would be greatly appreciated, ty Allen
Submitted: 7 years ago.
Category: Appliance
Expert:  John replied 7 years ago.

HI Allen

When you turn the dryer on do you hear a click

Let me know. And is the venting clean.

Customer: replied 7 years ago.
hi doc, no clicking sounds ever & vent is clear
Expert:  John replied 7 years ago.

http://www.partstap.com/partsearch/model.aspx?model_id=49100

Heres the breakdown of the dryer. The front comes off to get at the gas components

And the thermostats do you have a meter to check a few things,If not check the resettable thermostat Its listed in the breakdown .

Customer: replied 7 years ago.
Hi Doc, sorry had to run out a bit. I opened the bottom portion of the dryer but do not know exactly what to look for. I dont have any type of meter. Please advise.
Expert:  John replied 7 years ago.

http://www.partstap.com/partsearch/model.aspx?model_id=49100

This is the part to look for Its located under the drum.It senses the temp of the hot air leaving the dryer down at the bottom on the right.This part can cause your problem

If I helped you

Please Accept The Appliance Doc