How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask william Your Own Question
william, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3034
Experience:  Major Home Appliance Technician Specialist Whirpool Certificate
Type Your Appliance Question Here...
william is online now
A new question is answered every 9 seconds

i have a fisher and paykel dishwasher model 3886t soft touch

Customer Question

i have a fisher and paykel dishwasher model 3886t soft touch model that is stuck on the pause mode. How can i get the dishwasher to work, only really tried opening and closing door a few times
Submitted: 7 years ago.
Category: Appliance
Expert:  william replied 7 years ago.

try unpluging it for 5 minutes then plug back in see if that will re-set itself




Customer: replied 7 years ago.
Hi William,

thanks for that advice...
unfortunately that did not work, do you have any other suggestions? are you aware of how to do a test/ reset using the dishwasher buttons?

Kind Regards

Expert:  william replied 7 years ago.
is this doing a intermiting beeping? thanks
Customer: replied 7 years ago.
What happens is this,

whenever we power on the dishwasher,

the end light is flashing, then pressing the start/ pause button sounds a short series of beeps instead of starting the machine. Powering off and then on brings up the flashing light

Expert:  william replied 7 years ago.
Possible CauseSolution
The DishDrawerTM is in pause mode.Close the drawer and press the START/PAUSE button.

press the start/pause button for 3-5 seconds and if this dont work you will have to get a service tech out there hope this helps



Related Appliance Questions