How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My jk29009H double wall oven does not keep temperature when

Resolved Question:

My jk29009H double wall oven does not keep temperature when used for long periods of time. Icreasing the rheostat temp control to a higher temperature does not activate the heating elements. it initally works, but doesn't later. It is like a heat soak issue. Is there any experiance base with this issue, and if so, what should be looked at?
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
you may have a bad oven sensor, this is a picture of sensor its inside the oven on the back wall. Part 252164hope this helps Bryan
Customer: replied 8 years ago.
<p>I have re-flowed the solder on the controler board. Then I used both ovens simultaneously for over three hours. A separate oven thermometer showed that the temperature held, even after opening and closing the oven doors a number of times. I did the controler for the offending oven. If the other oven goes bad, then I'll repeat the process on that controler. Replacing the sensor would be my follow-up proceedure.</p><p> </p><p>Thanks</p><p> </p><p>Roger</p>
Expert:  Bryan replied 8 years ago.
thats great at least you have it narrowed down, well wishes Bryan
Bryan and 3 other Appliance Specialists are ready to help you

Related Appliance Questions