How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Kenmore Dryer, 90 Series, open dryer door and the light is

Customer Question

Kenmore Dryer, 90 Series, open dryer door and the light is on, close the door set the timer and push the start button and nothing happens but the normal click of the button.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
you may have a blown thermal fuse, can you get me model # ? thanks Bryan
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
Model # XXXXX
Expert:  Bryan replied 7 years ago.
is there a 110, 106, 556 or a similer set of three numbers ahead of this model #? its not comming up.let me know Thanks Bryan
Expert:  Bryan replied 7 years ago.
I found it under 110.66912690. heres a picture of the thermal fuse , I'm still checking for location on your dryer.Thermal-fuse (91c)click here for diagram of dryer your thermal fuse is part # XXXXX on diagram . I believe its inside dryer if you take the bottom panel off. just use a screw driver and about 3-4 inches in from side you will find clips. let me know , Brayn

Related Appliance Questions