How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

got a new selenoid and arm for the flap door on the ice maker

Resolved Question:

got a new selenoid and arm for the flap door on the ice maker got the dispenser to work but the flap door won't open where did we go wrong? can we get a schematic for the ice maker dispenser for a ge hot point side by side refrigerator??
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get me model #, thanks Bryan, I can get you diagram most likely, was the solenoid rusted up before changing?
Customer: replied 7 years ago.

Hi Bryan

The model # XXXXX XXXXX the selenoid we got and installed is working because we can get water from the unit and the auger is working for the ice but the door won't open to let the ice come out of the shoot

Expert:  Bryan replied 7 years ago.
you probably have a bad ice/water control board. this one slides, right ? click here to bring up board. we replace alot of these. hope this helps , thanks Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions