How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

How to replace the funnel dispenser on a GE artica profile

Customer Question

How to replace the funnel dispenser on a GE artica profile
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
can you give me model # XXXXX I can look up parts ?, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
PSS27SGNABS
Expert:  Bryan replied 8 years ago.
ok is this what you need to replace ? Part 947252I have to step out for a bit but will be back to check in a little while Thanks Bryan
Customer: replied 8 years ago.

Yes that is it

 

Expert:  Bryan replied 8 years ago.
ok heres a diagram of the complete assembly, first you need to unplug the ref. then take a small screw driver and take the fron control panel off, the where the keypad its the very front part #91 this just pops off its clipped on, then you should see four screws to remove part # XXXXX then you will be able to pull this part out of the way, after that you can see how your part goes in, alot of the time you can take one screw out holding part #45 in and then you can replace the funnel.pay attention how all this comes apart so you know how to put back together. click here for diagram. http://www.pcappliancerepair.com/model-frame-diagram.php?pr=1 well wishes, Bryan
Customer: replied 8 years ago.
Thank you
Expert:  Bryan replied 8 years ago.
your very welcome, Bryan