How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alan Your Own Question
Alan
Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 273
Experience:  20+ years in the appliance repair field.
11470909
Type Your Appliance Question Here...
Alan is online now
A new question is answered every 9 seconds

I attempted to set the clock on my Maytag gas stove range and

Customer Question

I attempted to set the clock on my Maytag gas stove range and now I have an error that say 5A6 where the time should be.
Submitted: 8 years ago.
Category: Appliance
Expert:  Jack Stiner replied 8 years ago.

Hello Customer,

 

I haven't seen that error code before. Have you tried to unplug the unit for about a half an hour and starting over? This might reset the control. If it doesn't then I would say you are in for a new control. If that is the case I will need to have your model number to look up the part for you.

 

 

I hope this helps you out. If you should need anything further please don't hesitate to ask.

Don't forget to leave feedback - bonuses are also welcome and appreciated!!!

 

100% customer satisfaction is my goal!!!

 

Thank you for choosing Just Answer.

 

 

Jack

Customer: replied 8 years ago.
That did not work, do you have any further suggestions?
Expert:  Jack Stiner replied 8 years ago.

Hello Customer,

 

Still need model number to proceed.

 

Jack

Customer: replied 8 years ago.
The model number is XXXXX I have read the manual and haven't found any solutions.
Expert:  Jack Stiner replied 8 years ago.

Hello Customer,

 

I don't have a clear answer for you as I have not seen that code before. The only thing I can suggest is to replace the control as show below. Cost of part is $177.75 form the source at the following link...

http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=1035458&PPStack=1

 

 

I hope this helps you out. If you should need anything further please don't hesitate to ask.

Don't forget to leave feedback - bonuses are also welcome and appreciated!!!

 

100% customer satisfaction is my goal!!!

 

Thank you for choosing Just Answer.

 

 

Jack

 

Part(NNN) NNN-NNNN width=

 

Expert:  Alan replied 8 years ago.

The code is SAB and means it is in the sabbath mode.

 

Press and hold the clock button for 5 seconds and it should turn off the sabbath mode.

 

The info for this is on page 12 of your users manual.

Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 273
Experience: 20+ years in the appliance repair field.
Alan and 3 other Appliance Specialists are ready to help you