How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alan Your Own Question
Alan
Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 273
Experience:  20+ years in the appliance repair field.
11470909
Type Your Appliance Question Here...
Alan is online now
A new question is answered every 9 seconds

I have a whirlpool model number LA5668TN0 Serial number CAO117085

Resolved Question:

I have a whirlpool model number LA5668TN0 Serial number CAO117085 (I am not sure if the o's are zero's or alphabet o)My problem is that the washer doesn't hold water. No matter what setting I have it on. All of the other cycles work. (ie spin) I have extra hoses hooked up in back to run to the drain and as quick as It fills with water the faster it comes out the drain. Any suggestions?
Submitted: 8 years ago.
Category: Appliance
Expert:  Alan replied 8 years ago.
Do you have the drain hose going above the height of the washer tub? If so you will need to install a syphon break. If the hose is lower then the top of the tub, you need to raise it, because it is just gravity draining the washer.
Alan and other Appliance Specialists are ready to help you