How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a GE dishwasher. I closed the door to start the wash

Resolved Question:

I have a GE dishwasher. I closed the door to start the wash cycle, I think I hit the start button, I must have hit a wrong button or something but now the start button is not lit up and the normal wash and heated dry buttons are blinking. I have tried turning it off and then back on but it does not do anything. If I close the door it sounds like it is in the wash cycle but there is not water in it.
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.

you may have a bad water fill valve. can you get me model #, thanks Bryan

Customer: replied 8 years ago.
Thank you for your prompt reply, I have corrected the problem. thanks again
Expert:  Bryan replied 8 years ago.
your welcome, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions