How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I GOT A WHIRLPOOL FRONTLOADER WASHER IT WON,T START.I HAVE

Customer Question

I GOT A WHIRLPOOL FRONTLOADER WASHER IT WON,T START.I HAVE REPALCED THE INTERFACE BOARD AN THE MAIN BOARD
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
did you check door switch? theres a little black push in pin that breaks off alot on these. this pin hits microswitch and sends power to board for lock . can you give me model# XXXXX Bryan
Bryan and 5 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
the light is blinking the model is GHW9200LW
Expert:  Bryan replied 8 years ago.
http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=1094190&PPStack=1 take a look at this picture and on the right picture you can see a very small pin sticking out near left side near end , pointing down this is the little pin you need to see if broken on your machine. it will be near the top of your door lock asm. if your looking at your machine. on the machine itself not door. if its broken or missing this is your problem. let me know Bryan

Related Appliance Questions