How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have an old Lady Kenmore hd dryer that has a broken belt.

Customer Question

I have an old Lady Kenmore hd dryer that has a broken belt. I bought a new belt, but am unable to find out how to get into the dryer to replace it?
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
can you get me a model# XXXXX can help thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
model # XXXXX XXXXX 86901. This is an old stackable unit running on 120v.
Customer: replied 8 years ago.
This is an old stackable unit running on 120v. Model # XXXXX 86901
Expert:  Bryan replied 8 years ago.
ok , on the top where your lint trap is there should be two screws , take them out. then take a screwdriver and pop top up. look down the sides of machine insisde and you should see two 5/16 screws holding front panel on remove these and pull front toward you and lift off bottom clips. you dont have a bottom panel on this in the front thats seperate from front panel with the door right? if you do have panel open with screwdriver and loosen two 5/16 screws holding top panel. once you have front off just replace belt around drum and through pully like this diagram and put back together in reverse. hope this helps Bryan

Related Appliance Questions