How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kenmore HE3 Front Load Washer Model #110.42922202.

Resolved Question:

I have a Kenmore HE3 Front Load Washer Model #110.42922202. The rubber biscuit ripped and I ordered another one on-line. Since I have replaced it, it has slipped off the inner housing twice. Does it need to be secured with an adhesive before being installed? Have I left a step out before securing it with the Steel tightening band? Please let me know what I am doing wrong or not doing. Thank you!
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
these are very difficult to install correctly . I believe your not getting the lip snapped over tub correctly is it the spring part that keeps popping off? you have to get these over lip on tub and make sure when you replace spring you don't have the boot come off lip anywhere at all. tell me if this is your clamp and spring assembly thanks BryanPart(NNN) NNN-NNNN width=
Bryan and 4 other Appliance Specialists are ready to help you

Related Appliance Questions