How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My top loading Kenmore Heavy Duty 80 series Washer has stopped

This answer was rated:

My top loading Kenmore Heavy Duty 80 series Washer has stopped working while full of water. It's level and only makes a quiet elongated beep sound when I try to start on any other cycle, tried replugging checked fuse box, etc. repair or replace with what?
can you give me full model # ? thanks Bryan
Customer: replied 8 years ago.
model # XXXXX 82881100
stock 28811
10 amps, 60 Hz 120 volts
serial C90518435
I believe you may have a bad lid switch this is a picture of it. if you have a volt meter and know how to use test this .let me know. its the little peg on lid that hits this, BryanPart 3406
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions