Can you give me a model number please?
Hi and Welcome to Just Answer, Ok, let's take a look at this;
I found this model, should be about the same to most uprights of this brand
Go to page 16 and 17, it talks about removing the brushes, this will be the same to remove the belt
If you need more help Let me know
Have another Question?
I am also an Expert in the following areas, please feel free to bookmark them all, then simply return to the proper profile and ask me another question;
Appliances.... Michael L....JA Appliance Repairman
Computer... Michael L Top Notch Computer Expert
Entertainment... Michael L..JA Entertainment Tonight
General Questions... Michael L...JA General Topic Expert
Home Improvement... Michael L...........JA Construction
Homework... Michael L.....JA Classroom Help 101
Plumbing... Michael L.......JA Plumbing Repair
Remember to type somewhere in the question, this is for Michael L.
If you find this post helpful please take a few minutes to leave Feedback.
By you leaving Positive Feedback you give your Expert additional opportunities to earn extra CASH and Recognition.
If you would like to give a Bonus they are always welcome.
If there is anything else let me know, If not click accept. Thank You Michael L.
ok, the discovery III has been discontinued, and was actually from a different company at the time. That is why I was having trouble finding the manual.
I found the manual here, use the drop down, discovery II and III are the same manual
But this was really no help to change the belt
I also found this thread that states that you don't take it apart like other vacuums to remove the belt, but you remove the top and sides to get to it, you can read more here, look at the last post for instructions
If you still can't figure it out I have found a contact that can help you further here
Aerus Customer Service300 East Valley DriveBristol, VA firstname.lastname@example.org
I hope this helps, if it does please don't forget to click Accept