I HAVE A COUNTER SAVER HOTPOINT MICROWAVE MOD# XXXXX VM125K 004 AND THE DOOR HANDLE HAS COME LOOSE ON IT HOW DO I TAKE THE DOOR OFF TO TIGHTEN IT ?
usually there is a plstic stip all the way around the door on the inside outer edge this snaps off. and you can get at handle screws after strip or trim piece is off. let me check model but i believe thats the way you get at screws.thanks Bryan
this seems to be the model you take off outer trim piece. click on this link and you can bring up diagrams of door. the part you have to remove is part # XXXXX on diagram. just get a small screwdriver and put it under trim and pry out easy and it should unstap all the way aroundbe careful though not to break it so it will go back on. www.pcappliancerepair.com und put your model in then go to diagram 178001 and scroll down to see door asm.. hope this helps Bryan
did you get any of my replys? Bryan
I am a certified appliance technician of 15 years