I have a Maytag Neptune Washer mod#MAH5500BWW Im having trouble with, i need a trouble shooting flow chart so i can diagnose what is wrong.
It wont start in cotton sturdy,cold/cold,normal load,and start it wont start and wont turn off when the off button is pressed It does pass the CL test,door lock test, But I wasent shure the touch pad test was conclusive, Ive missplaced the sheet from inside the contol panel on the washer and want to know if there is a PDF file with that data on it. as I may have to start Ohme ing out componets..............I live in the Alaskan Bush
many many miles away from a service tech.39671.6215252315
hi, thanks for using JustAnswer.com. I have sent you the link for the entire service manual for this machine. It is a big file, so be patient. It sounds like your control board is at fault, but you should find the manual helpful to properly diagnose. Thanks...
Thanks for allowing me to assist you in repairing your appliance. If you found this answer helpful, please click accept. If you don't, I will not get paid. Also, please take a moment to leave feedback, IT IS IMPORTANT!
Highly accurate diagnostician with over 30 years experience!
Im at my work computer and it wont allow me to open the PDF you sent so stay tuned as I switch to a different computer after work.
I am tuning...
I paid and opend the PDFfile it is for a Neptune 3000 a different and part analog type washer, my washer is a MAH 5500BWW a different front load washer, I did change the control board ($238) and I still have the same problem, must be a limiter switch is hung up or a diode is blown some where not to allow me to press the off button to turn off the washer.
I will get you the proper manual...hang on. Sorry about that.
No problem its worth getting it in the end, Im 30 miles above the Arctic circle on the northwest coast in a town of 3200