How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

trying to get my kenmore washer top off to replace lid ...

Resolved Question:

trying to get my kenmore washer top off to replace lid switch but can''t figure how to get underside to replace. I have the control switch already lifted up. need next steps
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
ok great you say you have control panel up already ? the rest is easy, take a screwdriver and put it into the gold colored clips ,( one on each side ) and pry toward back of machine they will release. unplug wire connector and tip whole cabinet forward and pull out from under botXXXXX XXXXXp. you will see how to replace switch then. hope this helps Bryan. please leave feedback if I've helped, and please press accept. thanks again Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions